Broadcast News

Bookmark and Share
21/09/2018

Lawo Launches New Virtual Module For V__matrix Eco-System

News Image
Lawo has launched its new vm_udx Virtual Module (VM) for the V__matrix eco-system.

The innovation premiered at IBC 2018, showcasing its ability to provide format conversion between SD, HD and 4K formats plus audio embedding/de-embedding, frame-sync, proc amp and RGB colour correction functionality.

At its core the vm_udx provides four independent paths of format conversion between SD, HD and 4K for IP and/or SDI signals. Conversion between SD and HD formats uses one path while conversion to/from 4K uses four paths. Each path provides full video framesync and audio sample rate conversion as well as audio and video delay functionality. Every path also has audio embedding/de-embedding capabilities with audio gain, surround to stereo downmix (5.1 & 7.1) and x/y-fade functionality for all outputs. A 5,312x5,312 mono audio router provides ample room for audio embedding/de-embedding to video as well as pure audio channel reshuffling if desired. Broadcast quality RGB and YUV colour correction is provided for every processing path. An additional four independent paths for a total of eight are available with the +4UDX option that can be added at any time.



Fundamentally designed with IP networking in mind vm_udx natively supports both ST2022-6 and ST2110-20 IP video as well as ST2110-30/-31/AES67 and RAVENNA IP audio streams. Conversion between IP video and IP audio standards is also possible, e.g. ST2022 to/from ST2110. To ensure high availability ST2022-7 hitless protection switching is natively supported. With the available io_bnc rear-plates vm_udx allows for legacy connection to SD-, HD- and 4K-SDI. For 4K both single-link 12G-SDI as well as quad-link (2SI and SQD) is supported. In addition the vm_udx is also capable of single-link to quad-link and 2SI to SQD cross-conversion.

Key features include:
• Four instances of Up/Down/Cross conversion between SD/HD/4K (1 instance when converting to/from 4K)
• Additional four instances available with the +4UDX option
• 5,312 x 5,312 audio mono matrix with full audio embedding/de-embedding and shuffling between SDI/IP, IP/IP and SDI/SDI with SMPTE2110-30/RAVENNA/AES67
• Includes framesync, RGB/YUV colour correction and timecode insertion
• 4K 12G-SDI single-link inputs/outputs when combined with the io_bnc rear-plates
• Built-in programming, configuration and streaming telemetry capabilities
• Simple management and control through Lawo vsmStudio makes operation imperceptible from a traditional baseband environment while maintaining all of the benefits of an IP system.

www.lawo.com
VMI.TV Ltd

Top Related Stories
Click here for the latest broadcast news stories.

11/11/2016
What Is The Future For Immersive Audio?
Peter Poers, Managing Director at Jünger Audio, looks at production efforts versus consumer experience. Introduction Along with the evolution of highe
06/05/2014
Digigram at BroadcastAsia2014
At BroadcastAsia2014, Digigram has announced it will feature "a complete range of products designed to address the requirements of all applications an
18/03/2014
Digigram Announces NAB Lineup
At this year's NAB Show, Digigram is to feature a complete range of products designed to "address the requirements of all applications and budgets". T
24/08/2010
APT Launch New IP Audio Silver At IBC
APT, the audio codec specialists within the WorldCast Systems Group will launch the IP Audio Silver for cost-effective audio to IP conversion at this
10/04/2002
Sonic introduces DVD-Audio Centre LE
Sonic Solutions have introduced the DVD-Audio Creator LE – a highly-affordable DVD-Audio authoring system with advanced features. Incorporating core t
20/08/2015
GatesAir Adds To IP Portfolio
GatesAir is to demonstrate its latest IP connectivity innovations for radio broadcasters to IBC2015, Stand 8.B20. With new products and applications f
20/03/2014
Digigram Releases New NTP
Digigram has announced the release of a new Network Time Protocol (NTP) feature for the company's IQOYA *LINK, IQOYA *LINK/LE, and IQOYA *SERV/LINK IP
09/08/2012
Blackmagic Design Announces Major New Software Update
Blackmagic Design has announced a major new software update that adds full-audio mixing capability to its ATEM 1 M/E Production Switcher and ATEM Tele
08/04/2019
Diversified To Host Daily IP Roadshow At NAB 2019
Diversified is gearing up to host its daily 'IP Roadshow' at NAB 2019, featuring the likes of TSL Products. The initiative will see a full solution in
13/01/2006
BSI joins forces with Axia Audio
Broadcast Software International, the makers of Simian Radio Automation and Stinger Instant Replay audio software, is the newest Axia Audio partner. B
14/04/2006
Axia to introduce iProFiler at NAB
Axia Audio will expand its line of software applications for IP-Audio networks at NAB 2006 with the introduction of iProFiler, a powerful multi-channe
01/03/2013
Jünger Audio Helps Two US Broadcasters Comply With CALM
WBPH-TV and WMBC-TV choose Jünger Audio’s T*AP Television Audio Processor as their "one-box" Loudness Control solution Berlin, Germany: The implementa
22/07/2015
Jünger Audio Prototype For IBC 2015
Jünger Audio will use IBC 2015 to showcase a prototype audio monitoring solution that will allow broadcasters to check the quality of all immersive au
03/02/2016
Digigram Announces ISE Lineup
Digigram has said it will demonstrate its digital and IP technology expertise at ISE 2016, as well as its early involvement in the development of stan
05/01/2017
Digigram Brings Product Line To BES EXPO 2017 

Digigram has announced that it will demonstrate its product range at BES EXPO 2017, at it's partners Technomedia Solutions' stand. The demonstration w